|
ACCU-SHIELD™ Aluminum Wheels.
In response to industry demand for an aluminum wheel that cleans easily with only soap and water, Accuride® has
developed ACCU-SHIELD aluminum wheels. These great looking wheels save time and money. There is no need for
polishing or cleaning with harsh abrasives. The ACCU-SHIELD wheel stays bright without the labor and expense of
polishing. See the new ACCU-SHIELD wheels today.
ACCU-SHIELD Aluminum Wheel Part
Numbers
Hub-Piloted Tubeless Aluminum Wheel
10-Hole, 285.75mm Bolt Circle, 220mm Bore
|
ACCU-SHIELD Aluminum Wheel Part Numbers |
|
Part Number |
Wheel Size |
Offset |
Disc |
Recommended
Valve |
Approx
Wt. (lbs.) |
Maximum
Load - Infl. |
| 28844 |
22.5 x 7.50 |
6.45" |
.935" |
TR545D |
55 |
7,300 - 120 |
| 29644 |
22.5 x 8.25 |
6.59" |
.885" |
TR545D |
47 |
7,390 - 120 |
| 29730 |
22.5 x 9.00 |
7.00" |
.980" |
TR545D |
62 |
10,000 - 130 |
| 29362 |
24.5 x 8.25 |
6.59" |
.935" |
TR545D |
55 |
7,300 - 120 |
Available Finishes (with part number suffix):
-
Machined (ANPC) Polished Outside, Front
(AOPC)
-
Polished Inside, Outer Dual (AIPC) Polished Both Sides (ABPC)
|
Appearance and
Maintenance |
-
ACCU-SHIELD wheels have a noticeable bright, clear appearance!
-
ACCU-SHIELD wheels are easy to clean - Just use mild soap and water!
- With ACCU-SHIELD wheels, there's no polishing! Save time and money.
- ACCU-SHIELD wheels have a decal on both sides of the wheel identifying them.
- ACCU-SHIELD wheels should not be cleaned with harsh abrasives. Wheels should be cleaned with mild soap and water
only. Refer to Accuride Technical Bulletin 2.0037 for further details on cleaning and maintenance.
- To protect the finish of ACCU-SHIELD wheels, Accuride recommends the use of Wheel-Guard® separator plates.
|
|
ACCU-SHIELD Wheel
Limited Warranty |
|
ACCU-SHIELD wheels are warranted for 60 months from the date of manufacture.
This Limited Warranty applies to ACCU-SHIELD wheels and does
not cover corrosion, misuse or other damage associated with the conditions addressed in Accuride's Limited Warranty or assoicated with
(i) any damage in the areas of the mounting surfaces (such as the area under the mounting nuts, hubs, drums and against other wheels in dual position), (ii) any
damage due to cleaning including use of abrasives, abrasive brushes, steel wool, scouring pads or strong chemicals, and (iii) any damage of the
ACCU-SHIELD wheel finish, due to removal, misuse, or chipping, whether by contact with road obstacles such as stones, gravel, curbs, barriers,
signs, or otherwise. Accuride recommends cleaning the wheels with mild soap and water.
Refer to Accuride Technical Bulletin 2.0037, for recommended
cleaning practices. |
Back
ATTENTION: To avoid accidents, OSHA regulations require
employers to train their personnel who service multi-piece and single-piece
rims/wheels. Contact your local OSHA area office or Accuride Corporation for
safety information and charts. For free safety manuals, charts and videotapes
write to Accuride Corporation, P.O. Box 15600, Evansville, IN 47716-0600. Or
visit us on the web at www.accuridecorp.com.
For more information on Accuride Wheels call 1-800-823-8332.
|
